SU600 / SU680 SingleSense®
Single-Use Flow-Through pH Sensors
Specifications
The sensor is rugged and always ready to use with no rehydration time required. A 1-point standardization check can be performed during mid-run by rotating the sensor into the built-in buffer storage chamber.
- Downstream applications
- Perfusion systems
- Viral inactivation
- Protein refolding
- pH adjustment of feed suspension
pH : 2 – 12
Available in small and large flow cell sizes with optional tubing and aseptic connectors.
Sensor rotates into a built-in buffer storage chamber for long-term storage and 1-point standardization check – with possibility of automation.
Available in gamma sterilized single-use assemblies with tubing and aseptic connectors.
- Plug & Play
- No rehydration time is required
- Reusable after chemical cleaning
Features
For use in perfusion systems and downstream applications including viral inactivation, protein refolding, and pH adjustment of feed suspension
Buffer Chamber
- Long-term probe storage for greater stability
- Verification via one-point calibration
- CIP protection
Plug & Play
Always ready to use; no
rehydration time required
Product benefits
Plug & Play
Rugged, always ready to use, no rehydration time is required. Available in gamma sterilized single-use assemblies with tubing and aseptic connectors.
Sensors for all flows rates
pH sensors are available in 6 different formats to cover a very wide range of flow rates.
Technical data
- SU600-02 : 1/8’’ Hose Barbs, Maximum Flow Rate 0,9 L/min
- SU600-04 : 1/4’’ Hose Barbs, Maximum Flow Rate 3,5 L/min
- SU600-06 : 3/8’’ Hose Barbs, Maximum Flow Rate 7,8 L/min
- SU680-08 : 1/2’’ Hose Barbs, Maximum Flow Rate 13,9 L/min
- SU680-12 : 3/4’’ Hose Barbs, Maximum Flow Rate 31,3 L/min
- SU680-16 : 1’’ Hose Barbs, Maximum Flow Rate 55,7 L/min
2–12 pH
- Long-term storage
- 1-point standardization check
- Avoid exposure to CIP process solution
- Operational : 15°–50° C [41° F–122° F]
- Storage : 5°–35° C [41° F–95° F]
- 36 months
- Post gamma : 30 months
50 kGy
8-pin Variopin
- Main Sensor Body : PEEK, USP Class VI, ADI Free
- Port Gasket : Dimethyl Silicone Rubber Pt Cure, USP Class VI, ADI Free
- O-ring : EPDM, USP Class VI, FDA Compliant Extraction Tested 21CFR, 177.2600, ADI Free
- pH Glass Electrode : Lead-free Glass
- Ceramic Junction : Alumina Silicate
